• Super Sticky Mat GEM-FX and GEM-CX
A superior double sided Sticky Mat 254 x 200 mm to fit the GEM-FX, GEM-FX4, GEM-CX4 and GEM-CX5 FlatBed. This will hold medium to large flat sheet material when engraving without using double sided tape. Unlike ordinary Sticky Mat this has extraordinary holding strength, very long lasting, self healing, use both sides, virtually impervious to engraving swarf, just wash in warm soapy water and it's like new. Of course continued cuts over a long period of time will degrade the effectiveness of it. Many small enclosed cuts (closed path such as a series of circles, or squares) could cause sections of the mat to come out which of course would degrade its performance.
Blank
Blank

Write a review

Please login or register to review

Super Sticky Mat GEM-FX and GEM-CX

  • Product Code: AC-00133
  • Availability: In Stock
  • $149.95


Related Products

Standard Acetyl Jig Set

Standard Acetyl Jig Set

Standard Acetyl Jig set, used for general holding of flat plates, gifts and jewellery in conjunction..

$94.95

GEM-FX5 Engraving Machine

GEM-FX5 Engraving Machine

The GEM-FX5 can cope with most industrial marking tasks, labels, switch sockets, tags, tools; identi..

$6,995.00

GEM-CX5 Engraving Machine

GEM-CX5 Engraving Machine

The U-MARQ GEM-CX5 with re-designed cylindrical drive providing more power and accuracy.  ..

$13,995.00

GEM Swarf Extractor

GEM Swarf Extractor

Swarf Extractor to fit the spindle housing on the GEM-FX, FX4, FX5, RX, RX4, TX and RX5. Ready ..

$249.00

Set of Three Jigs

Set of Three Jigs

Set of three Acetyl Jigs (can be purchased separately if required). This special set consist of..

$249.00

Ring and Pen Jig

Ring and Pen Jig

Special Acetyl Jig for holding all types of pens and signet rings secure while engraving, ..

$115.00

Watch and Medal Jig

Watch and Medal Jig

Special Acetyl Jig for holding all types of watches and medals secure while engraving..

$105.00

Jewellery Jig

Jewellery Jig

Special Acetyl Jig Set for holding all types of jewellery and gifts secure while engraving..

$105.00

Cutlery Jig

Cutlery Jig

Special Acetyl Jig Set for holding all types of cutlery secure while engraving. Will fit all U-MARQ ..

$199.95

Cuff Link Jig

Cuff Link Jig

These cuff Link jigs will hold a pair of round, square, rectangular or oval cufflinks. They are..

$175.00

Standard Aluminium Jig Set

Standard Aluminium Jig Set

Standard Aluminium Jig Set, these take 13 mm and 20 mm jig pins. These will fit all U-MARQ Engr..

$139.00

Plastic Coated Jig Pin Set 13 mm

Plastic Coated Jig Pin Set 13 mm

Plastic coated 13mm plastic covered Jig Pin Set used in conjunction with our jig set (Part No. AC-00..

$25.00

Plastic Coated Jig Pin Set 20 mm

Plastic Coated Jig Pin Set 20 mm

Plastic coated 20 mm jig pin set used in conjunction with our standard jigs (Part No. AC-00100 and A..

$33.00

GEM Vernier Adapter

GEM Vernier Adapter

This Acetyl Vernier Adapter will allow you to use a replaceable acetyl nose cone, (part no. AC-00105..

$78.00

Vernier Adapter Ring

Vernier Adapter Ring

A stainless steel ring that is required to hold the replaceable acetyl nose cone (part no. AC-00105)..

$28.00

Multi Purpose Jig Set

Multi Purpose Jig Set

Multi Purpose Jig Set for engraving hard to hold objects, with 156 holes by utilising 4 plastic coat..

$105.00

GEM-FX Centre Vice

GEM-FX Centre Vice

Fit this Centre Vice to your GEM-FX to turn it into a very capable gift and jewellery engraver, jaw ..

$575.00

GEM-CX Ring Engraver

GEM-CX Ring Engraver

GEM-CX inside / outside ring engraver enables you to engrave the inside of rings, fro..

$1,299.00

GEM-CX and Universal  Pen Hold

GEM-CX and Universal Pen Hold

This Pen Holding Kit fits the GEM-CX4, GEM-CX5, Universal-300 and Universal-350 and turns ..

$225.00

Bottle Holding Jig

Bottle Holding Jig

This jig will hold most standard wine bottles securely when engraving around the circumference. Maxi..

$360.00

Universal, GEM-CX and Quest Swarf Extractor

Universal, GEM-CX and Quest Swarf Extractor

Swarf Extractor to fit the spindle on the U-MARQ Universal, GEM-CX and Quest, series ..

$249.00

Engraving Lubricant

Engraving Lubricant

To be used for glass engraving and creating cutouts on precious metals...

$15.99

Super Swarf Extractor Hose

Super Swarf Extractor Hose

Super Swarf Extractor Hose sold in full metre lengths only. If you are purchasing this for a GEM-RX ..

$24.00

Bestsellers

11/64" Diamond Drag Cutters

11/64" Diamond Drag Cutters

11/64th x 6.5" conical drag diamond, general purpose for use with all metals, available in two sizes..

$39.95

GEM Spindle Drive Belt

GEM Spindle Drive Belt

Replacement spindle drive belt for the GEM-RX, FX, TX, ZX and VX4 series of machines...

$8.00

11/64'' 6.5'' Solid Micrograin Carbide Cutters

11/64'' 6.5'' Solid Micrograin Carbide Cutters

Solid Micrograin carbide cutter 11/64'' x 6.50'' for general use on plastics an..

$46.99

Engraving Lubricant

Engraving Lubricant

To be used for glass engraving and creating cutouts on precious metals...

$15.99

Inside Ring Engraver Diamond Cutter and Arm

Inside Ring Engraver Diamond Cutter and Arm

Replacement diamond cutter and arm for use with the inside ring engraver, available in standard 120&..

$170.00