The Universal-350 with it's new pre-loaded linear rails for longer life plus many other minor improvements. A true four axis machine, giving the user unprecedented control over the cylindrical axis. The cylindrical axis can be angled to cope with conical shapes or used in automatic centre locating mode for regular cylinders and can be raised or lowered for unusual shaped and sized objects . Ideal for the Trophy Shop, Jeweller or Industrial Marking. The uncluttered design combined with the mechanical stability, enables easy engraving of large or small items. All this on the same system, which seconds later can be engraving lettering only a fraction of a millimetre high on delicate jewellery. The U-MARQ Universal-350 Engraving Machine, takes over where our Compact leaves off. As well as gifts and personal items, the Universal-350 will engrave large tankards, large glass bowls, brass plaques, aluminium signage multiple badges and much, much more!. With its all new high quality, high speed spindle which is almost noiseless, it�s ideal for the workshop or retail environment.

The Retailer

The Universal-350 is the only real choice for the Trophy Shop and Shoe Repairer. The Universal-300 supports cylindrical, centre vice and flatbed engraving with super quick change modes with out the use of tools. With a solid spindle that can be used either rotated or non-rotated makes the Universal-350 ideal for engraving plastics, aluminium, brass, pewter, gold, silver, glass and diamond engraving of stainless steel. With a 10.5" cylindrical capacity large cups, glass, pewter tankards and trophies can be accommodated as well as small rings and bangles. The flatbed allows you to engrave a matrix of small plates or a single large plate with ease.
 
The Jeweller
 
The Universal-350 is an ideal companion to our smaller GEM range of engraving machines. The Universal-350 can be fitted with many types of jigs and accessories allowing the jeweller to engrave all manner of products including cufflinks, inside/outside of rings, pens, identity bracelets, cutlery, watch backs, pewter tankards, champagne flutes, lockets the list is only limited by your imagination.
 
The Gift Shop
 
Once the gift retailer realises the versatility of the Universal-350, they will wonder why they ever considered any other engraving machine (unless is a U-MARQ GEM). Fabulous quality engraving on cufflinks, pens, handbag mirrors, ladies compacts, picture frames, glasses, pewter, money clips, business card holders, lighters, keyrings the list is endless; you can add extra value to all your stock with little effort.
 
Industry
 
The Univerasl-350 is the ideal machine for industrial engraving and marking of flat and cylindrical parts, identification plates, graduated scales, consecutive serial numbering, tags, tools and a host of other items. With the ability to engrave with high accuracy and efficiency into a variety of materials, the uses for the Universal-350 are endless. The Universal Engraving Software has been tailored to be easy to use without sacrificing functionality, making training easy and quick.
 
Safety
 
For safety the Universal-350 should be securely mounted on a solid flat surface, it is not recommended to be free standing.
 
Probably the most versitile engraving machine in todays market.
information
Call for Prices Call 860-799-7800 For Prices.

Write a review

Please login or register to review

Universal-350 Engraving Machine

  • Product Code: EM-00203
  • Availability: In Stock
  • $16,995.00


Related Products

Standard Acetyl Jig Set

Standard Acetyl Jig Set

Standard Acetyl Jig set, used for general holding of flat plates, gifts and jewellery in conjunction..

$94.95

Bangle Attachment

Bangle Attachment

Extends the use of your Inside/Outside Ring Engraving attachment to engrave Bangles up to 70 mm diam..

$198.00

Set of Three Jigs

Set of Three Jigs

Set of three Acetyl Jigs (can be purchased separately if required). This special set consist of..

$249.00

Ring and Pen Jig

Ring and Pen Jig

Special Acetyl Jig for holding all types of pens and signet rings secure while engraving, ..

$115.00

Watch and Medal Jig

Watch and Medal Jig

Special Acetyl Jig for holding all types of watches and medals secure while engraving..

$105.00

Jewellery Jig

Jewellery Jig

Special Acetyl Jig Set for holding all types of jewellery and gifts secure while engraving..

$105.00

Cutlery Jig

Cutlery Jig

Special Acetyl Jig Set for holding all types of cutlery secure while engraving. Will fit all U-MARQ ..

$199.95

Cuff Link Jig

Cuff Link Jig

These cuff Link jigs will hold a pair of round, square, rectangular or oval cufflinks. They are..

$175.00

Standard Aluminium Jig Set

Standard Aluminium Jig Set

Standard Aluminium Jig Set, these take 13 mm and 20 mm jig pins. These will fit all U-MARQ Engr..

$139.00

Plastic Coated Jig Pin Set 13 mm

Plastic Coated Jig Pin Set 13 mm

Plastic coated 13mm plastic covered Jig Pin Set used in conjunction with our jig set (Part No. AC-00..

$25.00

Plastic Coated Jig Pin Set 20 mm

Plastic Coated Jig Pin Set 20 mm

Plastic coated 20 mm jig pin set used in conjunction with our standard jigs (Part No. AC-00100 and A..

$33.00

Multi Purpose Jig Set

Multi Purpose Jig Set

Multi Purpose Jig Set for engraving hard to hold objects, with 156 holes by utilising 4 plastic coat..

$105.00

GEM-CX and Universal  Pen Hold

GEM-CX and Universal Pen Hold

This Pen Holding Kit fits the GEM-CX4, GEM-CX5, Universal-300 and Universal-350 and turns ..

$225.00

Bottle Holding Jig

Bottle Holding Jig

This jig will hold most standard wine bottles securely when engraving around the circumference. Maxi..

$360.00

Jig Blanks

Jig Blanks

Custom make your own jigs. A pair of jig blanks to enable you to make your own special jigs using yo..

$78.75

Special Inside Ring Holding Pins

Special Inside Ring Holding Pins

A set of Inside Ring holding pins, these will fit all U-MARQ inside ring engraving heads and are for..

$131.25

Super Sticky Mat for the Universal Engraving Machine

Super Sticky Mat for the Universal Engraving Machine

A superior double sided Sticky Mat 230 x 127 mm to fit the Universal-300 and Universal-350..

$89.95

Bestsellers

11/64" Diamond Drag Cutters

11/64" Diamond Drag Cutters

11/64th x 6.5" conical drag diamond, general purpose for use with all metals, available in two sizes..

$39.95

GEM Spindle Drive Belt

GEM Spindle Drive Belt

Replacement spindle drive belt for the GEM-RX, FX, TX, ZX and VX4 series of machines...

$8.00

11/64'' 6.5'' Solid Micrograin Carbide Cutters

11/64'' 6.5'' Solid Micrograin Carbide Cutters

Solid Micrograin carbide cutter 11/64'' x 6.50'' for general use on plastics an..

$46.99

Engraving Lubricant

Engraving Lubricant

To be used for glass engraving and creating cutouts on precious metals...

$15.99

Inside Ring Engraver Diamond Cutter and Arm

Inside Ring Engraver Diamond Cutter and Arm

Replacement diamond cutter and arm for use with the inside ring engraver, available in standard 120&..

$170.00