The U-MARQ GEM-CX5 with re-designed cylindrical drive providing more power and accuracy.  New pre-loaded linear rails for longer life plus many other minor improvements. Designed for the countertop or workshop, for customers who have higher demands, the GEM-CX5 is an easy to use engraving solution. It is easy to set up and use in any retail shop or other environment, where fast and efficient engraving of single or multiple items are needed. It is capable of engraving anything from the finest bracelet to a large size door sign or tankard as well as glass items and trays.

Perfect Engraving

The self-centring vice is perfect when dealing with one-offs or production runs. Combining both flat and cylindrical engraving in one machine of this size is most unusual. The wide range of push-fit jigs quickly clamp item, including: rings, bracelets, clocks, pendants, salvers, scrolls, shields, pens, watches, trophy plates, christening gifts, key fobs, lighters, hip flasks, business card holders, decanter labels, photo frames,  laminate signs, badges, labels, brass plates and other items. Using a unique range of pressure settings, even fine gold lockets can be engraved without risk of damage.

Cylindrical

The GEM-CX5 is a true four axis machine, giving the user absolute control over the cylindrical axis. The cylindrical axis can be used to engrave trophies, tankards and glass. Using the unique U-MARQ Depth Profile function in our Universal Engraving Software (supplied as standard), conical and curved surfaces are easily coped with. For ultimate versitility the vice beam swings 180� to enable you to engrave larger text areas required on some items. For the Jeweller the addition of the inside and outside ring attachment, makes the GEM-CX5 the complete engraving solution. The GEM-CX5 is the ideal engraving machine for the Trophy Shop, Jeweller or Industrial Marker at a very affordable price.

Industrial Engraving

The U-MARQ GEM-CX5 can cope with most industrial marking tasks. Labels, switch sockets, tags, tools, identification plates the GEM-CX5 can handle them all with speed and precision. With a generous engraving area of 231 x 182 mm (9.1" x 7"), engraving speeds of up to 133 mm/sec (diamond drag), no task is too demanding.

Software

Equipped with the state-of-the-art and easy to use U-MARQ Universal engraving software, the GEM-CX5 will connected to a standard PC or laptop. With its unique 4 axes control system, it enables both flat and cylindrical items in the same setup. The U-MARQ CX engraving software package has the new and unique Depth Profiling function. Also included is the scanning and automatic vectorisation of logos. The GEM-CX5 ease of use enables everyone engraving gifts and jewellery to achieve a professional standard, after just a short introduction.

A fantastic counter top engraving machine at a truly unbeatable price.

information
Call for Prices Call 860-799-7800 For Prices.

Write a review

Please login or register to review

GEM-CX5 Engraving Machine

  • Product Code: EM-00204
  • Availability: In Stock

Related Products

Standard Acetyl Jig Set

Standard Acetyl Jig Set

Standard Acetyl Jig set, used for general holding of flat plates, gifts and jewellery in conjunction..

$94.95

Bangle Attachment

Bangle Attachment

Extends the use of your Inside/Outside Ring Engraving attachment to engrave Bangles up to 70 mm diam..

$198.00

Set of Three Jigs

Set of Three Jigs

Set of three Acetyl Jigs (can be purchased separately if required). This special set consist of..

$249.00

Ring and Pen Jig

Ring and Pen Jig

Special Acetyl Jig for holding all types of pens and signet rings secure while engraving, ..

$115.00

Watch and Medal Jig

Watch and Medal Jig

Special Acetyl Jig for holding all types of watches and medals secure while engraving..

$105.00

Jewellery Jig

Jewellery Jig

Special Acetyl Jig Set for holding all types of jewellery and gifts secure while engraving..

$105.00

Cutlery Jig

Cutlery Jig

Special Acetyl Jig Set for holding all types of cutlery secure while engraving. Will fit all U-MARQ ..

$199.95

Cuff Link Jig

Cuff Link Jig

These cuff Link jigs will hold a pair of round, square, rectangular or oval cufflinks. They are..

$175.00

Standard Aluminium Jig Set

Standard Aluminium Jig Set

Standard Aluminium Jig Set, these take 13 mm and 20 mm jig pins. These will fit all U-MARQ Engr..

$139.00

Plastic Coated Jig Pin Set 13 mm

Plastic Coated Jig Pin Set 13 mm

Plastic coated 13mm plastic covered Jig Pin Set used in conjunction with our jig set (Part No. AC-00..

$25.00

Plastic Coated Jig Pin Set 20 mm

Plastic Coated Jig Pin Set 20 mm

Plastic coated 20 mm jig pin set used in conjunction with our standard jigs (Part No. AC-00100 and A..

$33.00

Super Sticky Mat GEM-FX and GEM-CX

Super Sticky Mat GEM-FX and GEM-CX

A superior double sided Sticky Mat 254 x 200 mm to fit the GEM-FX, GEM-FX4, GEM-CX4 and GEM-CX5 ..

$149.95

GEM-CX Ring Engraver

GEM-CX Ring Engraver

GEM-CX inside / outside ring engraver enables you to engrave the inside of rings, fro..

$1,299.00

GEM-CX and Universal  Pen Hold

GEM-CX and Universal Pen Hold

This Pen Holding Kit fits the GEM-CX4, GEM-CX5, Universal-300 and Universal-350 and turns ..

$225.00

Cup Cone 15 - 70mm

Cup Cone 15 - 70mm

Rubber coated resin cone, 15 - 70mm, Ideal for glass, cup and tankard engraving, fits all U-MARQ Uni..

$84.99

Cup Cone 85 - 120mm

Cup Cone 85 - 120mm

Rubber coated resin cone, 85 - 120mm, Ideal for glass, cup and tankard engraving, fits all U-MA..

$104.99

Bottle Holding Jig

Bottle Holding Jig

This jig will hold most standard wine bottles securely when engraving around the circumference. Maxi..

$360.00

Jig Blanks

Jig Blanks

Custom make your own jigs. A pair of jig blanks to enable you to make your own special jigs using yo..

$78.75

Special Inside Ring Holding Pins

Special Inside Ring Holding Pins

A set of Inside Ring holding pins, these will fit all U-MARQ inside ring engraving heads and are for..

$131.25

Bestsellers

11/64" Diamond Drag Cutters

11/64" Diamond Drag Cutters

11/64th x 6.5" conical drag diamond, general purpose for use with all metals, available in ..

$39.95

GEM Spindle Drive Belt

GEM Spindle Drive Belt

Replacement spindle drive belt for the GEM-RX, FX, TX, ZX and VX4 series of machines...

$8.00

11/64'' 6.5'' Solid Micrograin Carbide Cutters

11/64'' 6.5'' Solid Micrograin Carbide Cutters

Solid Micrograin carbide cutter 11/64'' x 6.50'' for general use on plastics an..

$46.99

Engraving Lubricant

Engraving Lubricant

To be used for glass engraving and creating cutouts on precious metals...

$15.99

Inside Ring Engraver Diamond Cutter and Arm

Inside Ring Engraver Diamond Cutter and Arm

Replacement diamond cutter and arm for use with the inside ring engraver, available in standard 120&..

$170.00