• Light Touch
Balanced sprung cutter knob for use with diamond cutters, gives a lighter cut. This product can be used with all U-MARQ engraving machines and any other manufacturers using an 11/64th through cutter spindle.
Made in UK
Made in UK Manufactured in the UK by U-MARQ Ltd.

Write a review

Please login or register to review

Light Touch

  • Product Code: SP-00136
  • Availability: In Stock
  • $145.00


Related Products

GEM Swarf Extractor

GEM Swarf Extractor

Swarf Extractor to fit the spindle housing on the GEM-FX, FX4, FX5, RX, RX4, TX and RX5. Ready ..

$249.00

Standard 11/64th Brass Cutter Knob

Standard 11/64th Brass Cutter Knob

Standard 11/64th brass cutter knob (left hand thread)...

$24.95

Acetyl Nose Cones

Acetyl Nose Cones

Replacement Acetyl Nose Cones used to regulate the depth of  cut when deep engraving, available..

$16.00

Controller  Membrane Keypad

Controller Membrane Keypad

Membrane Keypad, only suitable fof all U-MARQ machines except GEM-1, GEM-2 and Universals witho..

$245.00

Vernier Spring Clip

Vernier Spring Clip

Stainless steel Vernier Spring Clip, suitable for all U-MARQ engraving machine spindles...

$30.00

Wrench 2mm

Wrench 2mm

General purpose 2mm wrench...

$9.95

Wrench 3mm

Wrench 3mm

General purpose 3mm wrench...

$9.95

GEM ''Z'' Axis Drive Belt

GEM ''Z'' Axis Drive Belt

Replacement spindle drive belt for the GEM-RX, FX, TX, ZX and VX4 series of machines...

$31.00

GEM Acetyl Vernier

GEM Acetyl Vernier

Acetyl Vernier and Nose Cone for use to control the depth when deep engraving. This accessory only f..

$84.95

GEM Brushless Spindle Motor

GEM Brushless Spindle Motor

Brushless Spindle Motor for the GEM-RX, GEM-RX4, GEM-FX, TX, ZX and GEM-FX4 only. It is advisab..

$250.00

GEM Replacement Spindle

GEM Replacement Spindle

Replacement Spindle for the U-MARQ GEM-FX, GEM-TX, GEM-ZX, GEM-RX and GEM-VX4 series of en..

$590.00

GEM Spindle Bearings

GEM Spindle Bearings

High quality replacement spindle bearings for the U-MARQ GEM-RX, GEM-FX, GEM-TX, GEM-ZX and GEM..

$48.00

GEM Spindle Drive Belt

GEM Spindle Drive Belt

Replacement spindle drive belt for the GEM-RX, FX, TX, ZX and VX4 series of machines...

$8.00

GEM Spindle Spanner

GEM Spindle Spanner

The GEM Spindle Spanner is used to hold the spindle whilst removing the cutter holder...

$14.95

120 watt 24 volt Switch Mode Power Supply

120 watt 24 volt Switch Mode Power Supply

Switch Mode Power Supply, suitable for all USB GEM controllers except the GEM-CX...

$190.00

Replacement GEM Ring Engraver Chuck

Replacement GEM Ring Engraver Chuck

Replacement Inside/Outside Ring engraving chuck. This comes complete with specially machined jaws an..

$645.00

Special Inside Ring Holding Pins

Special Inside Ring Holding Pins

A set of Inside Ring holding pins, these will fit all U-MARQ inside ring engraving heads and are for..

$131.25

Bangle Holding Bobbins

Bangle Holding Bobbins

Bobbins used for holding the item on the Bangle attachment, fitted with M3 stud...

$59.00

Rotary Spanner Set

Rotary Spanner Set

The GEM-RX Rotary Spanner Set is used to hold the rotary axis whilst removing the penholder, ri..

$30.00

GEM Pen Drive Bush

GEM Pen Drive Bush

Acetyl Pen Drive Bush, fits the driven end, suitable for the GEM-2, GEM-RX series&nbs..

$79.00

GEM Pen Support Bush

GEM Pen Support Bush

GEM-RX series Pen Support Bush, fits in the tailstock...

$16.99

GEM Tail Stock Ball Race

GEM Tail Stock Ball Race

High quality Ball Race to fit the GEM-RX series tailstock pen support bush...

$19.00

GEM Tailstock Complete

GEM Tailstock Complete

Complete Tailstock for the GEM-2, and GEM-RX series. Not include pen support bush, (Part No. SP..

$189.00

Tail Stock Clamp Strip

Tail Stock Clamp Strip

GEM-2 and GEM-RX series stainless steel tail stock Clamp Strip...

$15.00

Replacement Stepper Motor for GEM Engravinig Machines

Replacement Stepper Motor for GEM Engravinig Machines

Replacement stepper motor for "X", "Y", "Z" and "U" axe..

$250.00

Cup Cone 120 - 160mm

Cup Cone 120 - 160mm

Rubber coated resin cone, 120 - 160mm, Ideal for glass, cup and tankard engraving, fits all U-M..

$115.00

Cup Cone 50 - 85mm

Cup Cone 50 - 85mm

Rubber coated resin cone, 50 - 85mm, Ideal for glass, cup and tankard engraving, fits all U-MAR..

$94.99

Wrench 4 mm

Wrench 4 mm

General purpose 4 mm wrench...

$3.00

11/64"  x 6.5" Special 120 degree Engraving Diamond Cutter

11/64" x 6.5" Special 120 degree Engraving Diamond Cutter

Special ground shafted 11/64" x 6.5" 120° Diamond Cutter, can be used to engravin..

$97.95

11/64"  x 7"  Special Rotating Glass Engraving Diamond Cutter

11/64" x 7" Special Rotating Glass Engraving Diamond Cutter

Special 11/64" x 7" Glass Engraving Rotating Diamond Cutter, specially manu..

$89.95

11/64" Diamond Drag Cutters

11/64" Diamond Drag Cutters

11/64th x 6.5" conical drag diamond, general purpose for use with all metals, available in ..

$39.95

11/64" x 6.5'' Burnishing Diamonds.

11/64" x 6.5'' Burnishing Diamonds.

11/64" x 6.5" Rotated Burnishing Diamonds have a diamond with polished cutting facets..

$59.95

11/64'' 6.5'' Solid Micrograin Carbide Beveller Cutters.

11/64'' 6.5'' Solid Micrograin Carbide Beveller Cutters.

Solid Micrograin carbide cutter 11/64'' x 6.50'' , these cutters have a narrow ..

$46.99

11/64'' 6.5'' Solid Micrograin Carbide Cutters

11/64'' 6.5'' Solid Micrograin Carbide Cutters

Solid Micrograin carbide cutter 11/64'' x 6.50'' for general use on plastics an..

$46.99

11/64'' 6.5'' Specially Ground Cutting Tip.

11/64'' 6.5'' Specially Ground Cutting Tip.

Solid micrograin carbide cutter 11/64'' x 6.50''  with specially ground tip for..

$59.99

11/64'' 6.5'' with Parallel Tip Solid Micrograin Carbide Cutter

11/64'' 6.5'' with Parallel Tip Solid Micrograin Carbide Cutter

Solid micrograin carbide cutter 11/64'' x 6.50''  available with 1.5mm, 2m..

$49.95

5 Cutter Starter Pack

5 Cutter Starter Pack

Starter pack of 11/64" x 6 1/2" carbide cutters contains 5 cutters with different tip..

$175.00

Sacrifice Sheet

Sacrifice Sheet

10” x 8” plastic sheet used to protect the machines’ flatbed table during the cutt..

$9.95

11/64" x 7" 0.005SS Special Diamond Burnisher for Stainless Steel

11/64" x 7" 0.005SS Special Diamond Burnisher for Stainless Steel

Special 11/64" x 7" Stainless Steel Engraving Rotating Diamond Cutter, specially manufactu..

$89.95

Bestsellers

11/64" Diamond Drag Cutters

11/64" Diamond Drag Cutters

11/64th x 6.5" conical drag diamond, general purpose for use with all metals, available in ..

$39.95

GEM Spindle Drive Belt

GEM Spindle Drive Belt

Replacement spindle drive belt for the GEM-RX, FX, TX, ZX and VX4 series of machines...

$8.00

11/64'' 6.5'' Solid Micrograin Carbide Cutters

11/64'' 6.5'' Solid Micrograin Carbide Cutters

Solid Micrograin carbide cutter 11/64'' x 6.50'' for general use on plastics an..

$46.99

Engraving Lubricant

Engraving Lubricant

To be used for glass engraving and creating cutouts on precious metals...

$15.99

Inside Ring Engraver Diamond Cutter and Arm

Inside Ring Engraver Diamond Cutter and Arm

Replacement diamond cutter and arm for use with the inside ring engraver, available in standard 120&..

$170.00